|
|
|
| |
|
In 2 Channel mode, what speakers are working?
|
| |
|
| |
An input for a 2 channel device such as a VCR or a TV (with audio out function)
is provided on the rear of the HT80. This means that any 2 channel device can
be used and amplified over a choice of number of speakers. Connection is simple,
simply connect the device using a pair of RCA leads (phono leads) to the input
marked AUX. To switch the input of the player from 5.1 audio to 2ch audio, press
the INPUT button on your remote handset
A common trick used when no outputs are easily available from the TV is to watch
your TV through the video's AV channel with the TV set to AV (if you have a 'digi box' and
scart connections) or your TV on your video's TV programme number. The stereo
output is then taken from the video and fed into the amplifiers AUX input sockets.
There are 4 sound modes available. Each is selected by subsequent presses of the
SURROUND button on the front of the HT80. The current mode will be displayed
via led's on the Surr A. OR Surr B.
- With both led's off the FRONT LEFT, FRONT RIGHT and SUB WOOFER speaker will be operational only.
- Pressing the Surround will light the Surr A led and all 6 speakers will be working.
- Pressing the Surround again will light the Surr B lead and 4 speakers will be working. The surround speakers are non-operational in this mode.
- Pressing the Surround button again will light both led's. All 6 speakers will be operational using a different method.
- Pressing the Surround once more will return the unit back to standard 2 Channel output (with no led's lit).
|
Use of this site indicates that you accept the
terms of use.
Copyright © 2008. Key Electronics Ltd. All Rights Reserved.
|
|
 |
|
Home
