TT2        Quick Set Up Guide You can tune your TV in manually or automatically. *Tip* Put a cassette in your video and turn your sky or cable box to sky news. This will help when trying to set up your channel numbers. Automatic tuning 1)   Press the MENU button twice. The setup menu will appear on the screen. 2)   Select autoprogram  by pressing the PR DOWN button on your remote control. 3)   Press the middle OK button and your set will start to search and store all available channels. While this is happening ‘Autoprogram Working’ will flash on screen. 4)   After this process has completed the setup menu will disappear and the first stored program will appear on the screen. 5)   Refer to the fine tuning section within the instruction book on page 8 if the station(s) requires fine tuning. To exit this mode press MENU on your remote control. Manual Tuning 1)   Press the MENU button twice. The setup menu will appear on the screen. 2)   Select the search option by pressing the PR DOWN button on your remote control. 3)   Start to search by using the VOLUME buttons on your remote. 4)   The searching will stop once a program has been found. If the channel displayed is not the one required, or is of poor quality, continue to search using the VOLUME keys on your remote. 5)   If you want to store this program, select the program number row by pressing the PR DOWN button. 6)   Enter the desired station number by using the ten numbered keys on your remote or you can use the VOLUME keys to cycle through the channel numbers one at a time. 7)   Select store using the PR DOWN button. Press the OK button to confirm and stored will appear on the screen. 8)   The program will be stored in the position set in step 7. 9)   Go back to step 2 and repeat for all the channels that are available to you. Refer to the fine tuning section within the instruction book on page 8 if the station(s) requires fine tuning. Customer Helpline 01422 263265